How to build your own wine cellar Part 5
Building slab cellar.
On the finish you should build a concrete slab with the same floor waterproofing and towage. To
do it, place (with the floor and dry) a wooden frame inside the winery as follows: two beams abutting
the side walls to the ceiling (2.5m) and a crossbeam in the middle, which take full width of the building (on
height of 2cm above). About this cross beam will be placed pre-slabs 6m in length. spaced from each 30cm
another until complete 4m wide. In vain the pre-place slabs perforated bricks, which will be supported and
complete all openings, closing the cellar. Once all the bricks are placed, make a cover 4cm
concrete over the pre-slabs and bricks. Because of the wooden beam, the slab will bulge in the middle to dryness.
Once this is complete, remove the beams. The slab then assign with its own weight, completely sealing the cellar.
Scheme of the slab:
Construct the slab. Perforated bricks, girders, pre-slabs.
No comments:
Post a Comment