How to build your own wine cellar part 3
raising the walls of the cellar
You can erect the walls with bricks, blocks or concrete to a height of 2.5 m.
Once ready, towing them with a concrete made with crushed stone, cement, sand and a substance waterproofing
(Polypropylene based) diluted in water. If there is any obstacle in the opening of the hole, as very large stones, you
can build and plaster the walls from the inside. Place the bricks with a spacing of 2 cm Wall of land
compacted and each line to complete, throw the concrete waterproofing in vain. Upon completion of the walls, trailer
on the inside with the same mortar.
Be careful to leave a gap in the wall on the same side of the ramp, at least 1m for the placement of the door.
A total of 30cm from the cellar is out of the earth and it is in this space that you must build the air intakes, as if they were
windows, 20cm height and 50cm width, a height of 10cm from the ground. These should always be facing the sunrise
sun.
Finally finishing the walls, make a track on concrete waterproofing 50cm in height throughout the building.
Also fill any space between the walls and the ground, using ground and trying not to let her baby.
No comments:
Post a Comment